Asus VA27DQSB 27" 16:9 Adaptive-Sync Eye Care IPS Monitor User Manual
Page 23
3-5
•
ASCR
: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
•
Adaptive-Sync (DisplayPort and HDMI only)
: Allows an Adaptive-Sync
supported* graphics source to dynamically adjust display refresh rate
based on typical content frame rates for power efficient, virtually stutter
free and low-latency display update.
* Adaptive-Sync (DisplayPort and HDMI only) can only be activated within 48Hz
~ 75Hz.
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
•
Position (Only available for VGA input)
: adjusts the horizontal position
(H-Position) and the vertical position (V-Position) of the image. The
adjusting range is from 0 to 100.
•
Focus (Only available for VGA input)
: reduces Horizonal-line noise
and Vertical-line noise of the image by adjusting (Phase) and (Clock)
separately. The adjusting range is from 0 to 100.
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
•
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
•
Auto Adjust.
: Automatically adjusts the image to its optimized position,
clock, and phase (for VGA mode only).
5. Sound
Set the sound related settings from this menu.
ASUS VA27DQSB
Standard Mode HDMI 1920 x 1080 @ 60Hz
Volume
Mute
Source
Sound
•
Volume
: the adjusting range is from 0 to 100.
•
Mute
: toggles the monitor sound between on and off.
•
Source
: decides the monitor sound comes from which source.