Asus ProArt Display PA329CRV 31.5" 4K HDR Monitor - Manual (Page 25)

3-4 Chapter 3: OSD (On-Screen Display) menu
2. Palette
Set a desired color setting from this menu.
PA329CRV
3840 x 2160_60Hz
Preset
Native Mode
Signal
DisplayPort
Brightness
50
Exit Back Enter
Image
QuickFit Plus
PIP/PBP
Preset
Palette
50
80
50
50
Brightness
Contrast
Saturation
Hue
Color Temp.
Gamma
RGB Tuning
Black Level
• Brightness : The adjusting range is from 0 to 100.
• Contrast : The adjusting range is from 0 to 100.
• Saturation : The adjusting range is from 0 to 100.
• Hue : Shifts the image color between green and purple.
• Color Temp. : Contains 5 modes including 9300K, 6500K, 5500K,
5000K and P3-Theater. P3-Theater is only available for DCI-P3 Mode.
• Gamma : Allows you to set the color mode to 2.6, 2.4, 2.2, 2.0 or 1.8
(Mac).
• RGB Tuning :
* Gain
: The adjusting range is from 0 to 100.
* Offset
: The adjusting range is from 0 to 100.
• Black Level : To adjust the initialized 1st signal level of darkest gray
level.
* Signal
: The adjusting range is from 0 to 100.
* Backlight
: To adjust darkness of backlight.
• Color Reset :
* Current mode color reset
:
Resets the color settings of current color mode to the factory
default value.
* All modes color reset
:
Resets the color settings of all color modes to the factory default
value.