Dell U2422H 23.8" 16:9 IPS Monitor - Manual (Page 61)

Operating the Monitor
│
61
USB-C 90W
(U2422HE only)
Select the USB-C 90W input when you are using
the USB-C connector . Press the Joystick to
confirm the selection.
Auto Select Allows you to scan for available input sources. The
default is
On .
Auto Select for
USB-C
(U2422HE only)
Allows you to set Auto Select for USB-C to:
• Prompt for Multiple Inputs : Always displays
the “ Switch to USB-C Video Input ” message
for you to choose whether to switch or not.
• Yes : Always switches to USB-C video input
(without asking) when the USB-C cable is
connected.
• No : Never automatically switches to USB-C video
input when the USB-C cable is connected.
NOTE: Auto Select for USB-C is available only
when Auto Select is on.
Rename Inputs Allows you to select the input name for the selected
input source. The options are
PC , PC 1 , PC 2 ,
Laptop , Laptop 1 , and Laptop 2 .
NOTE: Input names in warning messages and Display
Info will not be changed.
Reset Input
Source
Press the Joystick to reset all settings under the
Input Source menu to the factory preset values.
Color Adjusts the color setting mode.