Dell UltraSharp 42.51" 4K Monitor - Manual (Page 12)

12 | About your monitor
9
USB-C 2 upstream port
(Data only)
Connect to your computer using the USB cable (A
to C or C to C). Once the USB cable is connected,
you can use the USB downstream connectors on the
monitor.
NOTE: Remove the rubber plug when using USB-C
connector.
10
USB-C 3 upstream port
(Data only)
11
USB-C 4 upstream port
(Data only)
12
Super speed USB
10Gbps (USB 3.2 Gen
2) (3)
Connect your USB device. You can use these ports
only after you have connected the USB cable (A to
C or C to C) from the computer to the monitor.
13
RJ45 connector
Connect to Internet. You can surf Internet via RJ45
only after you have connected the USB cable (A to
C or C to C) from the computer to the monitor.
14 Stand lock
Lock the stand to the monitor using a M3 x 6 mm
screw (screw not included).