Setting up the monitor, Attaching the stand – Dell UltraSharp 42.51" 4K Monitor User Manual
Page 28
Advertising
28
| Setting up the monitor
Setting up the monitor
Attaching the stand
NOTE: The stand is not installed at the factory when shipped.
NOTE: The following instructions are applicable only for the stand that was
shipped with your monitor. If you are attaching a stand that you purchased
from any other source, follow the setup instructions that were included
with the stand.
To attach the monitor stand:
1.
Align the stand base protruded blocks to the matching slot on the stand.
2.
Insert the stand base blocks fully into the stand slot.
3.
Lift the screw handle and turn the screw clockwise.
4.
After fully tightening the screw, fold the screw handle flat within the recess.
1
2
3
Advertising