Philips 8000 41.5" 4K HDR 138 Hz Gaming Monitor (White) - Manual (Page 13)

11
Height adjustment
120mm
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
Display base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Loosen the assembly screws, then
detach the neck from the monitor.
2
1
3. Gently attach the latch to the VESA
until the latch locks the VESA.
2
1