Philips 8000 41.5" 4K HDR 138 Hz Gaming Monitor (White) User Manual

Page 4

Advertising
background image

2

damage will not be covered under

warranty.

Do not knock or drop the

monitor during operation and/or

transportation.

Excessive usage of the monitor

can cause eye discomfort. It’s

recommended to take shorter breaks

more often at your workstation

than longer breaks and less often.

For example, a 5-10 minute break

after 50-60-minute continuous

screen use is likely to be better than

a 15-minute break every two hours.

Prevent eye strain while using the

screen for a constant period by :

Looking at something varying

distances after a long period of

focusing on the screen.

Conscious Blinking while you

work.

Gently closing and rolling your

eyes to relax.

Reposition your screen to the ap-

propriate height and angle.

Adjust the brightness and con-

trast to an appropriate level.

Adjust the environment light-

ing similar to that of your screen

brightness. Avoid fluorescent

lighting and surfaces that don’t

reflect too much light.

Seeing a doctor if your symptoms

worsen.

Maintenance

To protect your monitor from

possible damage, do not put

excessive pressure on the OLED

panel. When moving your monitor,

grasp the frame to lift; do not lift

the monitor by placing your hand or

fingers on the OLED panel.

Oil-based cleaning solutions may

damage the plastic parts and void

the warranty.

Unplug the monitor if you are not

going to use it for an extensive

period.

Unplug the monitor if you need to

clean it with a slightly damp cloth.

The screen may be wiped with a

dry cloth when the power is off.

However, never use organic solvents,

such as alcohol or ammonia-based

liquids.

To avoid the risk of shock or

permanent damage to the set, do

not expose the monitor to dust, rain,

water, or excessive moisture.

If your monitor gets wet, wipe it

with a dry cloth as soon as possible.

If a foreign substance or water

gets in your monitor, please

turn the power off immediately

and disconnect the power cord.

Then, if damaged, send it to the

maintenance center.

Do not store or use the monitor in

locations exposed to heat, direct

sunlight, or extreme cold.

To maintain the best performance of

your monitor and use it for a longer

lifetime, please use the monitor

in a location that falls within the

following temperature and humidity

ranges:

Temperature: 0-40°C 32-104°F

Humidity: 20-80% RH

Important information for Burn-in/

Ghost image

Please always turn on the Screen

Saver and Pixel Orbiting functions

from the On Screen Display (OSD)

menu. For additional information,

please refer to Chapter 8 on Screen

Maintenance.

Advertising