Philips 8000 41.5" 4K HDR 138 Hz Gaming Monitor (White) User Manual
Page 39
37
Main Controls. It is valid only in VGA
mode.
Horizontal flicker appears
•
Adjust the image using the “Auto”
function in OSD Main Controls.
•
Eliminate the vertical bars using
the Phase/Clock of Setup in OSD
Main Controls. It is valid only in VGA
mode.
The image appears blurred, indistinct, or
too dark
•
Adjust the contrast and brightness
on On-Screen Display.
An "after-image", "burn-in" or "ghost
image" remains after the power has
been turned off.
•
Uninterrupted display of still or
static images over an extended
period may cause "burn-in", also
known as "after-imaging" or "ghost
imaging", on your screen. "Burn-in ",
"after-imaging", or "ghost imaging"
is a well-known phenomenon in
OLED panel technology. In most
cases, the "burn-in" "after-imaging"
or "ghost imaging" will disappear
gradually over some time after the
power has been switched off.
•
Please always turn on the Screen
Saver and Pixel Orbiting functions
from the On Screen Display (OSD)
menu. For additional information,
please refer to Chapter 8 on Screen
Maintenance.
•
Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in”
“after-imaging” or “ghost imaging”
symptoms that will not disappear
and cannot be repaired. The damage
mentioned above is not covered
under your warranty.
The image appears distorted or the text
is fuzzy or blurred.
•
Set the PC’s display resolution to
the same mode as the monitor’s
recommended screen native
resolution.
Green, red, blue, dark, and white dots
appear on the screen
•
The remaining dots are a normal
characteristic of the liquid crystal
used in today’s technology, Please
refer to the pixel policy for more
detail.
*
The "power on" light is too strong and
is disturbing
•
You can adjust the “power on” light
using the power LED Setup in OSD
Main Controls.
For further assistance, refer to the
Service contact information listed in
the Important information manual
and contact a Philips customer service
representative.
* Functionality is different according to
display.