Sennheiser IE 80S BT Wireless Neckband In-Ear Headphones - Manual (Page 13)

Using the headphones
IE 80S BT | 13
Disconnecting the headphones from a
Bluetooth device
▷
Via the menu of your Bluetooth device, disconnect the connection
to the headphones.
The headphones are disconnected from the Bluetooth device.
You hear the voice prompt “Device (1) disconnected”. The head-
phones then search for other paired devices.
If no device is found, you hear the voice prompt “No connection”.
The headphones switch to standby mode.
If you want to clear the Bluetooth pairing list of the head-
phones, reset the headphones to the factory default settings (
>
26).
Installing the Smart Control app
To make full use of all the settings and functions of the headphones,
you need to have the free Sennheiser Smart Control app installed on
your smartphone.
Download the app from the App Store or Google Play and install it on
your smartphone. Alternatively, you can use your smartphone to
scan the following QR code or to call up the following Internet site:
www.sennheiser.com/smartcontrol
▷
Connect your smartphone to the headphones using Bluetooth ( >
11).
▷
Start the Smart Control app.
▷
Follow the instructions in the app.
▷
Simultaneously press the multi-function button and the voice
assistant button for 4 seconds to accept the Bluetooth Low
Energy connection.
4s
Hold
The Smart Control app recognizes the headphones and activates
all available settings and functions.