Sennheiser IE 80S BT Wireless Neckband In-Ear Headphones - Manual (Page 7)

Product overview
IE 80S BT | 7
Notes on voice prompts
The headphones output voice prompts for the following functions.
Using the Smart Control app, you can change the language of the
voice prompts, choose between voice prompts and beep sounds, or
deactivate the status messages with a few exceptions (e.g.
rechargeable battery is empty).
Voice prompt Meaning/headphones
“Power on” are switched on
“Power off” are switched off
“Device (1) (2) connected” are connected to device 1 or 2
“No connection” are not connected via Bluetooth
“Pairing” are in Bluetooth pairing mode
“Pairing successful” Bluetooth pairing successful
“No device found” cannot connect to a paired device
“Call rejected” incoming call rejected
“Call ended” call ended
“Mute on” microphone is muted, active call is
put on hold
“Mute off” microphone is reactivated
“More than xx % battery left” rechargeable battery has the stated
charge level
“Recharge headset” rechargeable battery is empty –
recharge the headphones
Notes on beeps/acoustic signals
The headphones output beeps/acoustic signals for the following
functions.
Acoustic signal Meaning/headphones...
2x low-pitched beep minimum volume is reached
2x high-pitched beep maximum volume is reached