Overview of the led indications of the earbuds, Notes on acoustic feedback – Sennheiser Conversation ClearPlus True Wireless ANC Speech Enhancer User Manual
Page 9
Product overview
Conversation Clear Plus | 9
Overview of the LED indications of the
earbuds
The LEDs of the earbuds indicate the status of the Bluetooth connec-
tion:
When the earbuds are in the charging case, signals about the charge
status of the earbuds are displayed:
Notes on acoustic feedback
The earbuds play melodies during some events, e.g. when setting the
minimum or maximum volume.
If the LED display does not light up:
•
Clean the contacts on the earbuds and in the charging case
(> 34).
•
Charge the rechargeable batteries of the earbuds and the
charging case (at least 30 minutes) until the LED display
lights up again (> 14).
LED
Meaning; the earbuds...
flashes blue
... are in Bluetooth pairing mode (pair-
ing for Bluetooth and e.g. for the
Sennheiser TV Connector transmitter)
lights up blue for
5 seconds
... pairing process successful
LED
Meaning; the earbuds...
lights up green
... earbuds are fully charged
flashes green
... earbuds are being charged via the
rechargeable battery of the charging
case
flashes orange
quickly
... firmware is being updated
lights up orange
for 5 seconds
... firmware update successful
lights up red
... charging error/battery error
flashes red
slowly
... earbuds are being charged via the
rechargeable battery of the charging
case, charge status < 10 %
flashes red
quickly
... rechargeable battery is almost
empty