Canon MT-26EX-RT Macro Twin Lite - Manual (Page 40)

40
With a similar procedure as exposure compensation, you can adjust the
flash output. The flash exposure compensation amount can be set up to
±3 stops in 1/3-stop increments.
1
Press the < @ > button.
Press function button 2 < @ >.
You can also set the amount by
pressing <
8 >.
X < f > is displayed and the flash
exposure compensation amount is
highlighted.
2
Set the flash exposure
compensation amount.
Turn < 9 > to set the flash exposure
compensation amount, then press
<
8 >.
X The flash exposure compensation
amount is set.
“0.3” indicates 1/3 stop and “0.7”
indicates 2/3 stops.
To cancel flash exposure
compensation, return the
compensation amount to ±0.
f Flash Exposure Compensation
N
Generally, set an increased exposure compensation for bright subjects
and set a decreased exposure compensation for dark subjects.
If the camera’s exposure compensation is set in 1/2-stop increments,
flash exposure compensation will be up to ±3 stops in 1/2-stop
increments.
When the flash exposure compensation is set on both the flash and the
camera, priority is given to the flash setting.
The flash exposure compensation amount can be set directly with < 9 >
without pressing the function button 2 < @ > (C.Fn-13, p.102).