Canon MT-26EX-RT Macro Twin Lite - Manual (Page 69)

69
This section describes multiple flash
shooting with slave C added to flash
heads A and B.
1
Set the flash mode to < a >.
Press the < E > button.
Turn < 9 >, select < Q >, then
press < 8 >.
2
Set < l > and < 6 >.
Press the < , > button.
Turn < 9 >, select < W >, then
press < 8 >.
3
Check the transmission channel and wireless radio ID.
If the channels of the master unit and slave unit are different,
set them both to “AUTO” or set them to the same number
(p.65).
If the wireless radio ID of the master unit and slave unit are
different, set them to the same number (p.65).
4
Set slave C and position it.
Set the firing group of the slave unit to C, and position the unit
within the range shown on page 58.
a : Multiple Flash Photography with
Slave C Added
C