Initial setup, Osd setting, Initial setup osd setting – BenQ RM8602K 86" Class 4K UHD Educational Touchscreen LED Display User Manual
Page 25
Advertising
Basic operations
25
Initial setup
After you have connected the display to the power, you are ready to power on the
display. The first time you power on the display, you will be guided through a series of
setup screens. Follow the on-screen instructions or the steps below to start up your
display and complete the initial setup.
1. Turn on the display. Wait for the display to boot up with the BenQ screen. This may
take a moment.
2. Tap
Next
on the screen to begin. Follow the on-screen instructions to set up the
language, date and time, and network. Or your can skip some of these steps and
complete the setup later.
OSD Setting
Under
General
, you can select a desired input source and adjust backlight. Refer to
for more information.
Advertising