PreSonus Notion 6 - Notation Software (Boxed) - Manual (Page 24)

1.14
One other Notion component you will use often is Score Setup . This semi-transparent overlay on
top of the score area enables you to very quickly add, move, change, and delete staves .
You must be in Edit mode to use Score Setup . There are various ways of opening it up . You can:
8 Click the button in the toolbar, or
8 Go to the Menu bar and select Score > Setup, or
8 Use the keyboard shortcut of Windows: Ctrl + T ; Mac:  + T .
Score Setup overlay over the score area (Mac).
To add a new instrument staff to your score:
A Select a sound source, such as Notion’s built-in sounds or a third-party library . You only see sources you have installed
on your computer, so your list may be shorter than the one shown above .
B After selecting the sound source, hover over an instrument family or click to lock it open . Click again to unlock .
C In a menu of available instruments within a family, select a particular instrument .
There is one exception: if you want to use a VSTi as a sound source
other than EWQL
Symphonic Orchestra, Miroslav Philharmonik, or Vienna Symphonic Library, then:
A Click the generic VST Instruments option .
B Click the name of the VSTi you want to use .
C Verify by clicking the VSTi name; you assign instruments to channels inside the VSTi .
Score Setup also displays separate
buttons to the left of measure one in each staff . These
buttons enable you to hide/show, delete, or change the appearance of individual staves .
To close Score Setup you can:
8 Click the Exit Score Setup button at the top, or
8 Press the Esc key, or
8 Click the button in the toolbar, or
8 Press the keyboard shortcut: Windows: Ctrl + T ; Mac:  + T .
Score Setup
A
B
C