Epson S1D13705 - Manual (Page 280)

Page 6 Epson Research and Development
Vancouver Design Center
S1D13705 QNX Photon v2.0 Display Driver
X27A-E-005-01 Issue Date: 01/09/10
2. Type the following command at the root of the Project source tree (gddk_v1.00 direc-
tory):
services/graphics/tests/bench/nto/x86/o/bench -dlhardware/devg/S1D13705/
nto/x86/dll/devg-S1D13705.so -mW,H,C,F -d0x0,0x0
Where:
W is the configured width of the display
H is the configured height of the display
C is the color depth in bpp (i.e. 8)
F is the configured frame rate
This command starts the bench utility which will initialize the driver as the secondary
display and exercise the drivers main functions. If the display appears satisfactory, restart
QNX Photon and the restart will result in the S1D13705 display driver becoming the
primary display device.
Comments
• To restore the display driver to the default, comment out changes made to the trap file
graphics-trapfile.