Software setup – Universal Audio Apollo x16 Heritage Edition Rackmount 18x20 Thunder3 Audio Interface with Real-Time UAD Processing User Manual
Page 26
Software Setup
26
Apollo x16 Hardware Manual
Software Setup
Note: Items on this page are detailed in the
.
System Requirements
All system requirements must be met for Apollo X to operate properly. Before proceeding
with installation, see the system requirements in the Apollo Software Manual.
Software Installation
The software must be installed to use the hardware and UAD plug-ins. The UAD Powered
Plug-Ins software installer contains the Apollo X software, drivers, and UAD plug-ins.
Registration and Authorization
Apollo X must be registered and authorized to unlock UAD plug-ins that are bundled with
the product. To register and authorize Apollo x16, visit:
•
Note: For optimum results, connect and power on Apollo X before installing the
software.
Latest Software
To obtain the latest UAD installer after initial registration, visit:
•
System Configuration
Complete details about setting up the Apollo X system, including how to integrate with a
DAW and related information, are included in the Apollo Software Manual.
Console Application
The included Console application is the software interface for the Apollo X hardware.
Console controls Apollo X and its digital mixing, monitoring, and Realtime UAD
Processing features. Console is also used to configure Apollo X I/O settings such as
sample rate, clock source, and reference levels.
For complete details about how to operate Console, refer to the Apollo Software Manual.
UA Support Videos
Informational videos are available to help you get started with Apollo X:
•