Akai Professional Akai MPK Mini Plus 37-Key MIDI Controller - Manual (Page 16)

16
To clear all events from a sequence, press and hold Shift and then press Tap Tempo to
clear all drum events from the sequence; press and hold Shift and then press Full Level to
clear all keyboard events from the sequence.
Press the
Seq Play / Stop button to play a sequence, and again to stop playback. Use the
[<<] and [>>] buttons to navigate the steps of a sequence. You can also edit sequence
parameters at any time by pressing Shift and using the Knobs .
Live Keyboard Recording:
When the Live Sequencer is active and the sequence is running, you can press a key at a
given step to add the corresponding note to that step. You can also activate and use Scale
and Chord modes during live recording.
Holding down the
Shift button and pressing that note again at the same step will remove a
playing note from the sequence.
Parameter Value Range Notes
STP (Sequencer
Steps) 01-16, 17-32, 33-48, 49-64 This parameter will update automatically
when the seq is playing to indicate which
16 steps are represented by the seq pattern
graphic.
LEN (Sequence
Length) 01-64 Shared between the Step Editor and Live
Sequencer.
PAD Live, Step Determines the mode of Pad recording. Live
is the default setting.
DIV (Time
division) 1/4, 1/4T, 1/8, 1/8T, 1/16,
1/16T, 1/32, 1/32T. Determines sequencer time division. This
function is shared with the Arppegiator.
KEY 0-08 Indicates the number of keys set to play at
the current step. Updates in real time based
on your inputs.
CH (MIDI
Channel) C1-C16 MIDI channel destination for Key
Sequencer.