Torso Electronics T-1 16-Track Algorithmic Desktop Sequencer - Manual (Page 56)

56 The T-1 Notebook : Reference & Guide
NOTES
Rhythmic Patterns
3
▌ SELECTING A PATTERN FOR EDITING - PATTERN PLAYING
1. Select and play a pattern. Hold [PATTERN] + Press [VBx], where ‘x’ is
the value button that represents the desired pattern.
2. While [PATTERN] is held, the state can be viewed on the value buttons.
Press [PATTERN] twice to lock the pattern view.
3. The currently selected and playing pattern will be represented by the
WHITE ⬛ flashing value button.
4. If T-1 is playing, the selected pattern will be queued to play following
conclusion of the current pattern. The selected and queued pattern will
be lit static WHITE
⬛ and can be edited.
5. To select without playing the pattern. While the pattern plays,
Hold [CTRL] + [PATTERN] + Press [VBx], where ‘x’ is the value button
that represents the desired pattern.
▌ CHAINING PATTERNS
1. Press [PLAY]. The selected pattern will play and loop.
2. The active playing pattern will be represented by the WHITE ⬛ flashing
value button. Viewed in the pattern page by holding [PATTERN] or
double press [PATTERN] to lock pattern view.
3. To create a chain of multiple patterns to play in order.
With pattern view locked, Press [VBx] of the first pattern + Press [VBx]
of the second pattern + Press [VBx] of the third pattern etc. All buttons
must be held simultaneously, but pressed in a defined order before
releasing.
4. The chained patterns will be lit BRIGHT BLUE ⬛ while the chain is
active. The actively playing pattern in the chain will flash WHITE ⬛
when playing starts.
5. The chained patterns will loop playback in the order they were selected.
6. Select a pattern to release the chain.