EverFocus EAN-1350 - Manual (Page 25)

25 of 59
DayNight Setting
Mode Mode for day (color) and night (b/w without IR-Cutfilter)
switching:
Auto: automatic switching to dayand night mode, "Status"
shows the current mode (not editable)
Manual: Manual setup of day / night mode
External: D/N switching by external contact, setup under
"EVENT"
Switching delay Delay of D/N switching in AUTO - mode. Setup range 1~15
seconds. A longer delay time avoids false D/N switching caused
by car light, clouds, reflections or other effects.
Sensitivity level Sensitivity treshold value for D/N switching in AUTO mode.
White Balance
Setting
Mode White Balance adjustment mode:
Auto: automatic mode, optimized for most applications
Outdoor: outdoor mode, colder color temperature
Indoor: indoor mode, warmer color temperature
Manual: manual setup of red (R Gain) and blue (B Gain) in the
range 1~100%
MWB Gain In manual White Balance mode setup of red (R Gain) and blue
(B Gain) in the range 1~100%
AE Setting
Backlight Backlight compensation. Activate the checkbox to aloow
baclight compensation. With active BLC adjust the BLC level
from 10 to 100% for optimizeld image result.
Mode Mode of aperture control:
ALC: mode for use with DC - controlled lenses, combined DC
lens control and automatic electronic shutter (AES)
ELC: mode for lenses with manual iris, automatic electronic
shutter (AES)
Shutter Electronic shutter: adjustable in ALC mode in the range 1/50 s
to 1/10.000 s,
In ELC mode shuter mode is automatic only.
Slow Shutter Image interpolation for enhancement of low lux performance,
adjustable in the range 2x to 32x
ATTENTION: For clearer reproduction of moving objects adjust
this value to the lowest possible value!
AGC Automatic Gain Control, adjustable in 5 steps.
Higher setting creates brighter image in low lux conditions, but
increases also noise in the picture.