EverFocus EAN-1350 - Manual (Page 44)

EAN-1350 Installation / Operation
44 of 59
Event Setting
Name Name of the event (appears in the event list)
Response to event
trigger Always: permanent event handling
During time: simple weekly schedule function for event
handling, set a start time and a duration of activity (in hours,
max 168)
Example: Event handling shall be activated from Saturday
08:00 am to Monday 8:00 am.
Set Checkbox "Sat"; Start from: 08:00; Duration: 48:00
Never: Event handling disabled
Trigger by Alarm input: select input 1,2 or 3 for contact alarm event
Motion detection: Select Area 1, 2 or 3 for motion event
On boot:
select this checkbox to create an event at
camera startup (or reboot)
Response Process Event actions, multiple selections are possible
Active alarm out Set this checkbox to switch the contact output of the camera, set
duration time
Upload
video/image to
server
Record event images or videos to FTP or SAMBA server.
Note: A definition of FTP or SAMBA server in NETWORK menu is
required to activate server upload.
Send HTTP
notification In case of event the camera will send a notification message to a
HTTP server.
Note: A definition of Notification server in EVENT > EVENT