EverFocus EAN-1350 - Manual (Page 27)

27 of 59
5.5 PTZ
This Setup page contains settings for electronic zoom and external RS-485 PTZ devices.
The EAN-1350 provides control of 2 PTZ devices, this allows a combined control of electronic
zoom and external PTZ - device.
Camera Diver 1
Driver setting for PTZ driver 1:
EZOOM: electronic zoom (only for MPEG4 mode) , address
setting is not relevant
Pelco-D: setting for external PTZ receiver with Pelco-D
protocol, please set receiver address in the range
0~255
Pelco-P: setting for external PTZ receiver with Pelco-P
protocol, please set receiver address in the range
0~255
None: no PTZ control
Camera Diver 2 Driver setting for PTZ driver 2:
EZOOM: electronic zoom (only for MPEG4 mode) , address
setting is not relevant
Pelco-D: setting for external PTZ receiver with Pelco-D
protocol, please set receiver address in the range
0~255
Pelco-P: setting for external PTZ receiver with Pelco-P
protocol, please set receiver address in the range
0~255
PTZ Driver Manager
Camera Driver...
Delete Delete: removes current PTZ drivers from camera firmware.