EverFocus EAN-1350 - Manual (Page 45)

EAN-1350 Installation / Operation
45 of 59
SERVER menu is required to activate server upload.
Send TCP
notification
In case of event the camera will send a notification message to a
TCP server.
Note: A definition of Notification server in EVENT > EVENT
SERVER menu is required to activate server upload.
Send NAP
notification
In case of event the camera will send a notification message and
alarm image to a NAP server. Use this function to create
network alarm event for PowerCon management software
(Version 4.3 or higher). Refer to Powercon 4.3 documentation for
more details.
Note: A definition of Notification server in EVENT > EVENT
SERVER menu is required to activate server upload.
Note: For correct communication with Powercon the device ID
must contain 10 characters without space.
Go to preset
location Only for cameras mounted to PTZ devices with preset
functionality.
Select a preset position number.
Day/Night Switch Day / Night mode.
Using this feature is only possible with the setting:
Setup menu > Video/Image > Sensor > Day/Night setting >
Mode: EXTERNAL