Moog Subharmonicon Semi-Modular Polyrhythmic Analog Synthesizer - Manual (Page 26)

27
SEQ 1 ASSIGN (VCO 1) (Continued)
SUB 2: When this button is engaged (lit), the output of Sequencer 1, as defined by the positions of the
four STEP knobs, will modify the integer value of the SUB 2 FREQ knob. When this button is off (unlit),
SUB 2 will continue to play using the setting of the SUB 2 FREQ knob, maintaining a constant harmonic
relationship to VCO 1.
SEQUENCER 2
STEP 1 THROUGH STEP 4
The STEP knobs individually affect the values
set by the VCO 2 FREQ knob, and the associated
SUB 1 FREQ , and/or SUB 2 FREQ knobs, based on
the SEQ 2 ASSIGN buttons defined below. In the
center position, no change is applied. Rotating the
STEP knob clockwise will add a control signal to
the selected frequency settings, producing a higher
pitch for this step. Rotating the
STEP knob counter-
clockwise will subtract (by adding a negative
control signal) from the selected frequency
settings, producing a lower pitch for this step.
NOTE: The behavior of the individual STEP knobs is also
determined by the current setting of the QUANTIZE
button and the SEQ OCT button.
SEQ 2 ASSIGN (VCO 2)
These buttons allow the individual steps of Sequencer 2 to be
assigned to control the pitch of OSC 2 (VCO 2), the integer value of
SUB 1, the integer value of SUB 2, or any combination of the three.
OSC 2: When this button is engaged (lit), the output of Sequencer 2,
as defined by the positions of the four STEP knobs, will modify the
value of the VCO 2 FREQ knob. The pitch of SUB 1 and SUB 2 will
also change as they maintain their constant harmonic relationship
with VCO 2.
SUB 1: When this button is engaged (lit), the output of Sequencer 2,
as defined by the positions of the four STEP knobs, will modify the
value of the SUB 1 FREQ knob. When this button is off (unlit), SUB
1 will continue to play using the setting of the SUB 1 FREQ knob,
maintaining a constant harmonic relationship to VCO 2.
SUB 2: When this button is engaged (lit), the output of Sequencer 2,
as defined by the positions of the four STEP knobs, will modify
the value of the SUB 2 FREQ knob. When this button is off (unlit),
SUB 2 will continue to play using the setting of the SUB 2 FREQ
knob, maintaining a constant harmonic relationship to VCO 2.
THE SEQUENCERS
(Continued)