The patchbay, Patchbay, Row one – Moog Subharmonicon Semi-Modular Polyrhythmic Analog Synthesizer User Manual
Page 30
31
True to its semi-modular nature, Subharmonicon is
equipped with an extensive patchbay that allows creative
connections to other electronic music modules and
Eurorack synthesizer systems. These convenient patch
points also allow the creation of new control and signal
pathways within Subharmonicon itself. Subharmonicon
contains a total of 32 patch points. Of these, 17 are inputs,
identified by normal text on the panel. The remaining
15 are outputs, indicated by reversed-color text over an
inverse background. The Patchbay is designed to work
with 3.5mm patch cables only. A set of five is included in
your box. If you should need more, Moog patch cables are
available through authorized Moog Dealers.
ROW ONE
VCO 1 INPUT
This input accepts a 1-volt/octave control signal to modify the frequency of
VCO 1. The value of this signal is summed with the value set by the
VCO 1 FREQ
knob and the individual Sequencer 1
STEP
knobs.
CV INPUT:
-5V to +5V
NOTE:
The signal received here to control VCO 1 is normalled to control VCO 2 as well.
Connecting a patch cable to the VCO 2 input jack will disable this normalled connection.
VCO 1 SUB INPUT
This input accepts a control signal to choose the value (1-16) of the VCO 1
Subharmonic Oscillators; the
SUB 1 FREQ
and
SUB 2 FREQ
(VCO 1) knobs
should be centered to receive bi-directional (+/-) control voltages.
CV INPUT:
-5V to +5V
INPUTS:
VCO 1
VCO 1 SUB
VCO 1 PWM
VCA
VCO 2
VCO 2 SUB
VCO 2 PWM
CUTOFF
PLAY
RESET
TRIGGER
RHYTHM 1
RHYTHM 2
RHYTHM 3
RHYTHM 4
MIDI IN
CLOCK
OUTPUTS:
VCA
VCO 1
VCO 1 SUB 1
VCO 1 SUB 2
VCA EG
VCO 2
VCO 2 SUB 1
VCO 2 SUB 2
VCF EG
SEQ 1
SEQ 1 CLK
SEQ 2
SEQ 2 CLK
CLOCK
TRIGGER
THE PATCHBAY