Moog Subharmonicon Semi-Modular Polyrhythmic Analog Synthesizer - Manual (Page 41)

42
MIDI OPERATIONS
In addition to receiving MIDI clock information, Subharmonicon can also respond to the following MIDI
CC (Control Change) messages.
MIDI note data received by Subharmonicon is referenced as an offset from the note C4 (middle C).
Rotating the
VCO 1 FREQ knob and/or VCO 2 FREQ knob fully counter-clockwise will place the frequency
of each oscillator at C4, so that MIDI note data received by Subharmonicon will be received unchanged.
MIDI CONTROL CHANGE (CC) MESSAGES:
Parameter MIDI CC# Default Range Remarks
VCO 1 Frequency
4 [MSB]/
36 [LSB]
0
0 - 127 [MSB] / 0 - 127 [LSB]
(14-Bit)
Provides
±
2.5 octaves of
control, added to the VCO 1
FREQ knob setting. When the
VCO 1 FREQ knob is in the
center position, the MIDI CC
will sweep the same range as
the knob.
VCO 1
SUB 1 Frequency
103 0
0 - 7 = Integer Value 16
8 - 15 = Integer Value 15
16 - 23 = Integer Value 14
24 - 31 = Integer Value 13
32 - 39 = Integer Value 12
40 - 47 = Integer Value 11
48 - 55 = Integer Value 10
56 - 63 = Integer Value 9
64 - 71 = Integer Value 8
72 - 79 = Integer Value 7
80 - 87 = Integer Value 6
88 - 95 = Integer Value 5
96 - 103 = Integer Value 4
104 - 111 = Integer Value 3
112 - 119 = Integer Value 2
120 - 127 = Integer Value 1
MIDI CC replaces the (VCO 1)
SUB 1 FREQ knob setting;
moving this knob overrides
the MIDI CC value.
VCO 1
SUB 2 Frequency
104 0
0 - 7 = Integer Value 16
8 - 15 = Integer Value 15
16 - 23 = Integer Value 14
24 - 31 = Integer Value 13
32 - 39 = Integer Value 12
40 - 47 = Integer Value 11
48 - 55 = Integer Value 10
56 - 63 = Integer Value 9
64 - 71 = Integer Value 8
72 - 79 = Integer Value 7
80 - 87 = Integer Value 6
88 - 95 = Integer Value 5
96 - 103 = Integer Value 4
104 - 111 = Integer Value 3
112 - 119 = Integer Value 2
120 - 127 = Integer Value 1
MIDI CC replaces the (VCO 1)
SUB 2 FREQ knob setting;
moving this knob overrides
the MIDI CC value.
VCO 2 Frequency
12 [MSB]/
44 [LSB]
0
0 - 127 [MSB] / 0 - 127 [LSB]
(14-Bit)
Provides
±
2.5 octaves of
control, added to the VCO 2
FREQ knob setting. When the
VCO 2 FREQ knob is in the
center position, the MIDI CC
will sweep the same range as
the knob.