Scanning setup overview – Xerox VersaLink C500/DN Color Laser Printer User Manual
Page 130

Scanning Setup Overview
If the printer is connected to a network, the printer is enabled for scanning. Before you can scan, do
the following:
• If you are scanning to a shared folder on your computer, share the folder, then set the correct
permissions. In the Embedded Web Server, add a Network (SMB) destination to your Address Book
entry.
• If you are scanning to an FTP server, in the Embedded Web Server, add the FTP server to your
Address Book entry.
• If you are scanning to an SFTP server, in the Embedded Web Server, add the SFTP server to your
Address Book entry.
• If you are scanning to an email address, in the Embedded Web Server, configure the email server.
130
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide