AverMedia Live Gamer Portable 2 Plus - Manual (Page 10)

1 0 / 91
Step 2: Select / Edit Capture Device
Select your capture device o n the list of connected capture devices. You can edit the device
by clicking the “ p en” icon.
※ Notes:
・ If the capture device is not connected properly, or if the driver for this capture device is not installed
correctly, the capture device will not be recognized by RECentral
・ When you use Single Mode, only capture device s can be used. Webcams are not supported in Single Mode.
Edit Capture Device
※ Notes: The items to be edited may vary depending on the functions and specifications of
the capture device .
Specify / Set the source (capture device)
Below is an example of the capture device setup.
1 S ource (Capture Device)
Switch to the connected capture device and select the source from the
drop-down list
2 Re-detect the capture device and update the status.
3
Select which terminal to be used for video output from game machine or
the video device that you are using. Select either “ HDMI ” or
“component”
Input
( ※ When a device has both HDM I and component input
terminals, this item is shown.)
4 Name Click on the name shown o n the source list to change.
Edit C apture D evice
Refresh