FujiFilm X-S20 Mirrorless Camera with 18-55mm Lens (Black) - Manual (Page 152)

126
5
T
a
k
ing Phot
og
raphs
Flash Photography
Setting Setting Description Description
C Flash mode (TTL)
Choose a fl ash mode for TTL fl ash control. The options avail-
able vary with the shooting mode (
P , S , A , or M ) selected.
•
E (FLASH AUTO) : The fl ash fi res only as required; fl ash lev-
el is adjusted according to subject brightness. A p icon
displayed when the shutter button is pressed halfway indi-
cates that the fl ash will fi re when the photo is taken.
•
F (STANDARD) : The fl ash fi res with every shot if possible;
fl ash level is adjusted according to subject brightness. The
fl ash will not fi re if not fully charged when the shutter is
released.
•
G (SLOW SYNC.) : Combine the fl ash with slow shutter
speeds when photographing portrait subjects against a
backdrop of night scenery. The fl ash will not fi re if not fully
charged when the shutter is released.
D Sync
Choose whether the fl ash is timed to fi re immediately after
the shutter opens (
H / 1ST CURTAIN ) or immediately before
it closes ( I / 2ND CURTAIN ). 1ST CURTAIN is recommended in
most circumstances.
Red-Eye Removal
Red-eye removal is available when FLASH is selected for F FLASH
SETTING > RED EYE REMOVAL . Red-eye removal minimizes “red-eye”
caused when light from the fl ash is refl ected from the subject’s retinas.
Flash Sync Speed
The fl ash will synchronize with the shutter at shutter speeds of 1⁄180 s or slower.
Optional Flash Units from Fujifi lm
The camera can be used with optional Fujifi lm shoe-mounted fl ash units.
Third-Party Flash Units
Do not use third-party fl ash units that apply over 300 V to the camera hot
shoe.