Epson Equity 320SX PLUS - Manual (Page 186)

Appendix C
Troubleshooting
You should not encounter any difficulties as you set up and
use your computer, but if anything out of the ordinary
happens, refer to this appendix. You can correct most
problems by adjusting a cable connection, repeating a
software procedure, or resetting the computer.
Besides trying the suggestions in this chapter, you can run
diagnostics checks on the various components of your
computer system. See Appendix B for instructions.
If the suggestions here or in Appendix B do not solve the
problem, see “Where to Get Help” in the Introduction.
Identifying Your System
When you request technical assistance, be ready to provide
the serial number of your computer, its ROM BIOS version
number, its configuration (including the type of disk drives,
monitor, and option cards), and the names and version
numbers of any software programs you are using.
You can find the serial number on the computer’s back
panel. If you are able to use your computer, follow the steps
below to obtain information about your configuration, as
well as your ROM BIOS and MS-DOS version numbers.
1. If you do not have a hard disk, insert the MS-DOS Startup
diskette in drive A.
2. Turn on your computer or press the RESET button to
reboot it.
Troubleshooting C-l