Epson Equity 320SX PLUS User Manual

Page 72

Advertising
background image

You see a message on the screen that tells you the disk drive’s

read/write heads will remain locked until you reset the
computer or turn the power off and on again. The computer
locks the heads and disables the keyboard. Remove any
diskettes and turn off the computer. You are now ready to
move it to the new location.

Note

For convenience, you may want to copy the following two

files from the Reference diskette to your hard disk:

HDSIT.COM

HDSIT.VER

Then, when you want to run HDSIT, just log onto the

directory on your hard disk where you stored the files,
type

H DS

IT, and press

Enter.

See your MS-DOS manuals for

instructions on using the COPY command.

If you have a 51/4-inch diskette drive and you still have the
original diskette drive protector card, you may want to insert
it into the drive prior to shipping your computer to protect

the read/write heads.

3-20

Using Your Computer

Advertising