Epson Equity 320SX PLUS - Manual (Page 49)

Now type the password you want to use. You can type up to
eight characters using the letter or number keys, in upper- or
lowercase. For example, you could enter the following:
123aBc!
You can use the backspace key to correct mistakes. After you
type the password, press Enter.
Note
Be sure to remember the password you enter or write it
down and keep it in a safe place. If you cannot remember
it, you will not be able to access the computer the next
time you turn it on. If you forget your password, however,
there is a way to disable the function. See “Password
Problems” in Appendix C for more information.
C h a n g i n g o r D e l e t i n g a P a s s w o r d
If you want to change the current password, highlight the
Password
option and press Page Up or Page Down
to
display
New
Ins t a
11.
Then enter a new password, as
described above.
To delete the password, press Page Up or Page Down
to
display
Not installed.
Be sure to save your settings (as described at the end of this
chapter) when you exit the SETUP program.
2-14 Running the SETUP Program