Audeze Maxwell Wireless Gaming Headset for Xbox Series X|S - Manual (Page 10)

Maxwell User Guide
https://docs.google.com/document/d/e/2PACX-1vTrHnmNzKeGF_1g_MrnBcwoGYVF4YhIc4pC94cH9947CRvuVti7XKPldfksgxRtKeu5nnbIWS2NXULD/pub[4/26/2023 4:58:03 PM]
Mono Audio For Headphones - If you have any hearing issues or want
to hear all incoming audio on both ears, you can toggle this on.
Note: You will get no positional/directional audio cues with this setting,
as this will force both sides of your headphones to play the exact same
audio at the exact same volume.
Microphone
Mic Level - Adjusts how loud your microphone is for other users. This
should be set to a balanced level.
Note: Maxwell uses automatic gain control to help automatically
optimize the mic volume levels, so adjust your mic levels accordingly.
3D Audio Settings
These settings are used for customizing Sony’s Tempest 3D audio
engine.
Enable 3D Audio For Headphones - Off means Maxwell is set to basic
stereo output. Toggling this on will enable spatial 3D audio virtual surround on
Maxwell.
Adjust 3D Audio Profile - Here you can select between 5 types, all
which have varying heights. Choose whichever sounds closest to your ear level
for the optimal 3D audio experience.
Listen and Compare - Here you can quickly switch between a test of
basic stereo, and 3D audio enabled.
Xbox Setup
Maxwell is compatible with Xbox One consoles and Xbox Series S|X using the
USB Dongle (into the console USB ports with the included USB-C to A
extension), or via 3.5mm AUX connection (into the controller).
Quick Access Menu