Audeze Maxwell Wireless Gaming Headset for Xbox Series X|S User Manual
Page 7
Maxwell User Guide
https://docs.google.com/document/d/e/2PACX-1vTrHnmNzKeGF_1g_MrnBcwoGYVF4YhIc4pC94cH9947CRvuVti7XKPldfksgxRtKeu5nnbIWS2NXULD/pub[4/26/2023 4:58:03 PM]
1. Insert dongle into a source device
2. Insert a paperclip into the small hole on the side of the dongle and press
the button down until the LED on the dongle begins to flash (you’ll feel a
slight click when pressing).
3. Once the LED begins to flash, press hold the Noise Reduction button on
the front of your headphones,
and while that button is held down
,
press the power button three times. Your headphones will power cycle
and pair to the dongle on the next boot.
Note on the “PC” dongle setting
The PC mode on the dongle should be used for
all other devices
,
including other consoles like the Nintendo Switch, Steam Deck, etc. as
well as PC and Mac. The PS and Xbox modes are specifically tailored
to those consoles and PC mode will give you the best functionality on
other devices.
The wireless dongle that comes with your Maxwell offers ultra low latency
playback, very robust wireless transmission strength and hi-res audio. For
devices that support Bluetooth LE Audio, the dongle is
not required
for low
latency playback as long as LE Audio enabled on your device (currently this
option is in the Developer Options menu on Android. This is a part of the new
Bluetooth 5.3 protocol that will become available on more Android devices in
the future, for more information on setup, see the
section).