Audeze Maxwell Wireless Gaming Headset for Xbox Series X|S - Manual (Page 6)

Maxwell User Guide
https://docs.google.com/document/d/e/2PACX-1vTrHnmNzKeGF_1g_MrnBcwoGYVF4YhIc4pC94cH9947CRvuVti7XKPldfksgxRtKeu5nnbIWS2NXULD/pub[4/26/2023 4:58:03 PM]
USB Connection
Your Maxwell will automatically switch to USB mode ( Audio cue: USB ) when a
USB cable is plugged into the port on your headphones with an active data
connection. USB mode supports 24bit/96khz lossless hi-res audio on
compatible systems.
If you want to charge your Maxwell PlayStation while using it in Bluetooth
mode, you’ll need to plug it in to a power only USB port like a wall wart charger
(a USB Condom will also work for charging on sources with a data connection).
Maxwell has compatibility with iOS products via wired USB while using them
with official Apple adapters. Compatibility cannot be guaranteed with other
adapters.
AUX Connection
Maxwell will automatically switch to AUX mode when an AUX cable is plugged
into the correct port on your headphones. PLEASE NOTE: There are two AUX
in ports on your headphones, the AUX in port is the one at the bottom of the
headphones nearer to the volume wheels. The recessed port at the front of the
headphones is for the Boom mic only.
Using the Wireless Dongle
When using your dongle on your preferred console, the switch on the side of
the dongle must be set to the appropriate setting for full functionality. To set the
dongle, unplug it from your source device and flip the switch to PS or Xbox
(depending on the version you own) and plug it back in. Your Maxwell will
automatically reconnect to the dongle if it’s detected ( Audio cue: USB Dongle ).
To pair a new dongle or re-pair an existing one to your headset (as of firmware
version 32):