Dell 14" Mobile Precision 3470 Mobile Workstation (Silver) - Manual (Page 29)

About this task
The following images indicate the location of the 4-cell (64 Wh) battery and provide a visual representation of the installation
procedure.
Steps
1. Align the screw holes on the 4-cell battery with the screw holes on the palm-rest and keyboard assembly.
2. Replace the two screws (M2x3) that secure the 4-cell battery to the palm-rest and keyboard assembly.
3. Connect the battery cable to the connector on the system board.
Next steps
1. Install the microSD card .
2. Install the base cover .
3. Follow the procedure in After working inside your computer .
Battery cable
Removing the 4-cell battery cable
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the microSD card .
3. Remove the base cover .
4. Remove the battery .
NOTE: If battery is disconnected from system board for service, then there is a delay during system boot as the system
undergoes RTC battery reset.
About this task
The following images indicate the location of the battery cable and provide a visual representation of the removal procedure.
Removing and installing components 29