Installing the power button – Dell 14" Mobile Precision 3470 Mobile Workstation (Silver) User Manual
Page 51
Advertising
Installing the power button
About this task
The following image indicates the location of the power-button board and provide a visual representation of the installation
procedure.
Steps
1. Align and place the power-button board on the palm-rest assembly.
2. Replace the two (M2x2.5) screws that secure the power-button board to the palm-rest assembly.
NOTE:
This step applies to both models with and without the fingerprint reader.
Next steps
1. Install the
2. Install the
.
3. Install the
4. Install the
.
5. Install the
.
6. Install the
.
7. Install the
or
.
8. Install the
.
9. Install the
.
10. Follow the procedure in
After working inside your computer
.
Removing and installing components
51
Advertising