Sensor board, Removing the sensor board – Dell 14" Mobile Precision 3470 Mobile Workstation (Silver) User Manual
Page 84
Advertising
Steps
1. Connect the eDP/display cable to the connector on the camera.
2. Adhere the eDP/display cable to the display back cover.
3. Adhere the conductive tape and route the eDP/display cable to the display back cover.
Next steps
1. Install the
2. Install the
.
3. Install the
.
4. Install the
.
5. Install the
.
6. Install the
.
7. Follow the procedure in
After working inside your computer
.
Sensor board
Removing the sensor board
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
.
84
Removing and installing components
Advertising