6maintenance, 2 service contact, 3 software update – Li.Lac UV-C Microphone Disinfector User Manual
Page 19
19
Notice
. Disconnect the device from mains before updating. Keep separated
during the whole update process. If not adhered to the device or the PC
may be damaged.
6
Maintenance
6.1
Who is permitted to perform Maintenance Work on
Li.LAC
?
Maintenance work on
Li.LAC
may only be performed by specialized personnel or under their supervision.
Defective devices may be sent in for service after previous arrangement.
6.2
Service Contact
e-Mail:
phone: +49-2683-9738938
6.3
Software Update
Upon start-up Li.LAC indicates the current software version in the display. Download
the latest firmware
here:
www.lilac.works/download
.
You will need a PC running Windows 10 and a micro-USB cable for the update process.
1.
Download the latest firmware version. Read the
ReadMe
-file.
2.
Remove upper housing lid (see
6.5.1
, page
22
).
3.
The micro-USB
port is located on the
electronic circuit board behind the display
(Fig. 7).
Fig. 7