Li.Lac UV-C Microphone Disinfector - Manual (Page 26)

26
Notice. Adhere closely to all steps in 6.5.4 to avoid damage to the device.
6.5.4 Closing the device
Note: All steps refer to the perspective
of the device’s rear view.
1. Put the upper housing lid on the front
left edge of the housing. (Fig. 20)
2. Slide the upper housing lid to the left.
Slide the front left mirror edge ( 1 )
underneath the left housing flange ( 2 ).
(Fig. 21)
3. Slide upper housing lid fully in direction
of the device’s front (Fig. 22). The lid is
now sitting on the rear edges the mirror.
Fig. 20
Fig. 21
Fig. 22