Li.Lac UV-C Microphone Disinfector User Manual
Page 25
25
3.
Turn the UV-C lamps in direction of arrow as
shown in Fig. 17 (
1
) until you hear a clicking
sound. Remove UV-C lamps in direction of
arrow (
2
). Dispose of the UV-C lamps (see
7
,
page
30
)
Abb. 17
6.5.3
Installing new UV-C Lamps
Notice
. Avoid direct skin contact with UV-C lamps. Wear cotton gloves.
Fingerprint grease may shorten life cycle of UV-C lamps.
1.
Install new UV-C lamps as indicated in Fig. 18
(
1
). Turn UV-C lamps in direction of arrow (
2
)
until you hear a clicking sound.
Notice:
Li.LAC
will only operate if both UV-C lamps
are installed.
Fig. 18
2.
Re-attach UV-C lamp protection panel and
re-fit the screws (Fig. 19).
Fig. 19
Notice.
Use only UV-C lamps from the same manufacturer. Use either Osram
or Philips.