Denon AVR-X1700H 7.2-Channel Network A/V Receiver with HEOS - Manual (Page 135)

Changing the settings
1
Set the items below to the settings you want to
register.
The following settings from
A
to
J
can be memorized for MAIN
ZONE, and settings
A
and
B
can be memorized for ZONE2.
A
Input source ( v p. 68)
B
Volume ( v p. 69)
C
Sound mode ( v p. 117)
D Audyssey (Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® ,
Audyssey Dynamic Volume ® ) ( v p. 158)
E
“Restorer” ( v p. 156)
F
“Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” ( v p. 111)
G
“Displaying your desired video during audio playback (Video
Select)” ( v p. 114)
H
“All Zone Stereo” ( v p. 115)
I
“Speaker Preset” ( v p. 116)
J
“TV Audio sharing settings” ( v p. 136)
0
Press and hold QUICK SELECT while a radio station is being received is
being played back with any of the following sources, the current radio
station is memorized.
0 Tuner / Internet Radio Station / Spotify
2
Press MAIN or ZONE2 to select the operating zone with
the remote control.
The button for the selected zone is lit.
3
Press and hold the desired QUICK SELECT until
“Quick z Memory” or “Z2 Quick z Memory” appear on
the display.
The current settings will be memorized.
z is displayed the number for the QUICK SELECT button you
pressed.
o Changing the Quick Select Name
The MAIN ZONE Quick Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see “Quick Sel.Names”. (
v p. 212)
Contents Connections Playback Settings Tips Appendix
135
Front panel Display Rear panel Remote Index