Denon AVR-X1700H 7.2-Channel Network A/V Receiver with HEOS - Manual (Page 197)

Front Speaker
Set the front speaker A/B to use for every sound mode.
A
(Default):
Front speaker A is used.
B : Front speaker B is used.
A+B : Both front speakers A and B are used.
0 This can be set when “Assign Mode” is set to “Front B”. ( v p. 188)
Speaker Preset
Two speaker settings can be saved to suit the environments where you
use your speakers.
For example, you can configure two presets easily to switch between
equalizer or speaker settings measured using Audyssey
® Setup if the
characteristics of your room differ depending on factors such as whether
you use the screen.
If you want to use a preset, select the preset you want to use and then
configure settings such as Audyssey
® Setup or the speaker settings to
save those settings to the preset you have selected.
Preset 1
(Default):
Saves the settings to Preset 1.
Preset 2: Saves the settings to Preset 2.
0
The following settings are saved to presets.
0 “Amp Assign” settings
0
“Speaker Config.” settings
0
“Distances” settings
0
“Levels” settings
0
“Crossovers” settings
0
“Bass” settings
0 “MultEQ ® XT” data
0
“Manual EQ” data
0
This setting also be configured using “Speaker Preset” in the option menu.
( v p. 116)
Contents Connections Playback Settings Tips Appendix
197
Front panel Display Rear panel Remote Index