Vivotek FE9380-HV 5MP Outdoor Network Fisheye Dome Camera with Night Vision User Manual
Page 243
VIVOTEK
User's Manual - 243
channel support ePTZ or not, and so on.
* For most products, the last stream of a
channel will not support ePTZ. It is reserved
for full view of the channel. For some
dual-stream products, both streams support
ePTZ.
nanystream
0, <positive
integer>
0/7
number of any media stream per channel
iva
<boolean>
0/7
Indicate whether to support Intelligent Video
analysis
whitelight
<boolean>
0/7
Indicate whether to support white light led.
iris
<boolean>
0/7
Indicate whether to support iris control.
supportsd
<boolean>
0/7
Indicate whether to support local storage.
fisheye
<boolean>
0/7
The parameter is used to determine whether
the product is fisheye or not.
tampering
<boolean>
0/7
Indicate whether to support tampering
detection.
tamperingmode tamper,toodark,toob
right,tooblurry
0/7
Available tampering mode list.
* Only available when "capability_tampering"
is 1.
adaptiverecording
<boolean>
0/7
Indicate whether to support adaptive
recording.
adaptivestreaming
<boolean>
0/7
Indicate whether to support adaptive
streaming.
supporttriggertypes seq,boot,motion,net
workfail,recnotify,ta
mpering,vi,vadp,di,
volalarm,temperatu
re,pir, visignal,
backup
<product
dependent>
0/7
list all the trigger types which are supported in
the camera:
"seq" = Periodic condition
"boot" = System boot
"motion" = Video motion detection
"networkfail" = network connection failure
"recnotify" = Recording notification.
"tampering" = Tamper detection.
"vi" = Virtual input (Manual trigger)
"vadp" = VADP trigger
"di"= Digital input
"volalarm" = Audio detection
"temperature" = Temperature detection
"pir" = PIR detection