Adjust the volume balance, Switch the phase – Fostex PM-SUBmini 50W 5" Active Subwoofer User Manual

Page 27

Advertising
background image

11

„

„

Adjust the volume balance

Adjust the volume balance between the speakers using the

VOLUME

knob

on the back

of the unit. If other speakers are equipped with a volume control function, utilise them
together.

1 Lower the volume of the player (digital audio player, etc.)

The higher volume than you expect may be produced. Lower the volume in advance.

• If your player is not equipped with a volume controller, lower the volume of the speakers.

2 Start playback of the player, and adjust the volume balance.

Adjust the volume so that the bass sound and treble sound are heard naturally.

„

„

Switch the phase

You can reverse the sound phase using the

PHASE

switch on the back of the unit.

When you use this unit with PM0.3 or PM0.1 (especially when installing them side by side),
you can leave the

PHASE

switch at the 180° position. However, depending on the set up

position, the sound may be heard naturally when you change the switch to 0°.

Test both

positions and select the better one.

En

g

lis

h

Advertising