Tilta Nucleus-Nano II FIZ Wireless Lens Control System - Manual (Page 14)

DISCLAIMER
12
WARNING & PRECAUTION
Thank you for purchasing a TILTA product.
Before using this product, please carefully read this document to ensure that the product has been set up correctly. The final interpretation of
this document and all related documents for this product belongs to TILTA. For updates, please visit the official website at www.tilta.com for
the latest product information. TILTA reserves the right to modify any information in this manual at any time without prior notice and without
assuming any responsibility.
By using this product, you are deemed to have carefully read the disclaimer and warnings, understood, agreed, and accepted all the terms
and content of this statement. You promise to take full responsibility for the use of this product and any consequences that may arise.
You commit to using this product only for legitimate purposes and agree to this term as well as any related regulations, policies, and guidelines
set by TILTA.
TILTA is not responsible for any damages, injuries, or legal liabilities caused directly or indirectly by the use of this product. Users should follow
all safety guidelines mentioned in this document, including but not limited to those mentioned. Despite the above provisions, consumer rights
are still protected by local laws and regulations and are not affected by this disclaimer.
TILTA is a trademark of Shenzhen TILTA Technology Co., Ltd. and its affiliated companies. Product names, brands, and other trademarks
appearing in this document are trademarks or registered trademarks of their respective companies.
Before using this product, please strictly follow the instructions below. Our company assumes no responsibility for any consequences caused
by improper operation or misuse.
ACCESSORY REQUIREMENTS
Charging at temperatures higher than 40°C (104°F) or lower than 5°C (41°F) may result in decreased battery performance, swelling, leakage,
overheating, and other damage.
Do not store the battery in an environment exceeding 60°C (140°F). The ideal storage temperature is 22°C (71.6°F) to 28°C (82.4°F).
The battery must be charged with the charging equipment provided by TILTA. TILTA will not be responsible for any consequences resulting
from charging with non-TILTA official equipment.
OPERATING ENVIRONMENT
BATTERY SAFETY
MAINTENANCE & CARE
This device contains strong magnets. To avoid magnetic interference, please keep it away from magnetic cards, IC cards, implantable
medical devices (such as pacemakers), hard drives, RAM chips, and other devices that may be affected.
Use the battery in an environment with a temperature between -20°C (-4°F) and 45°C (113°F). Excessive temperatures can cause the
battery to swell abnormally, catch fire, or even explode. Before using the device in a low-temperature environment, it is recommended to
fully charge the battery at room temperature to extend its service life.
Do not place the device near flammable or combustible materials (such as carpets and wooden products) while charging. Always pay
attention to the charging process to prevent accidents.
Store the device in a dry environment, with an ideal storage humidity not exceeding 40%.
Please keep the device clean and free of sand, dust, and other foreign objects. Use a clean, dry cloth to promptly clean any debris on the
product.
Do not subject the device and its accessories to strong impacts or vibrations, as this may damage them and cause device failure.
If the device collides with a hard object or the screen is broken due to a strong external impact, do not touch or attempt to remove the
broken parts. Instead, immediately stop using the device and promptly contact TILTA customer service.
NOTE: The device will generate slight heat during operation, which is normal.
[Warning] This device is equipped with a non-removable built-in battery. please do not attempt to replace the battery yourself, as this
may damage the battery or the device.
Do not use the battery in environments with strong electrostatic or magnetic fields, as this may cause internal circuit failures in the device.
Do not expose the battery to high temperatures or place it near heat-generating devices, such as sunlight, heaters, microwaves, ovens,
or water heaters. Overheating the battery may cause it to explode.
Do not disassemble or modify the battery, insert foreign objects, or immerse in water or other liquids, as this may cause the battery to
leak, overheat, catch fire, or explode.
The electrolyte inside the battery is highly corrosive. If it accidentally comes into contact with your skin or eyes, rinse immediately with
clean water for at least 15 minutes and seek medical attention.
Do not throw the battery into fire, as this can cause it to catch fire and explode.
Do not drop, squeeze, or puncture the battery. Avoid subjecting the battery to external pressure, which may cause internal short circuits
and overheating.
Do not use damaged batteries.
Do not store the battery for an extended period after it has been completely discharged, to avoid entering a deep discharge state that
can cause damage to the battery cells, rendering it unable to be used again.
Be sure to fully discharge the battery before disposing of it in a designated battery recycling bin. Batteries are hazardous chemicals and
must not be disposed of in regular trash bins. For details, please follow the local laws and regulations regarding battery recycling and
disposal.
If the battery cannot be fully discharged, do not dispose of it directly in a battery recycling bin; instead, contact a professional battery
recycling company for further processing.
！