Pairing, The nucleus-n ii hand unit pairing with vnd motor, The nucleus-m motor number setting – Tilta Nucleus-Nano II FIZ Wireless Lens Control System User Manual
Page 22
CONNECT
� . � G
CHANNELS
O N
� . � G
W I F I
CONNECT
BLUETOOTH
PAIRING
02
02
A
F
FOCUS
ZOOM
IRIS
A
B
RE
C
12
A
F
0 1
0 1
THE NUCLEUS-N II HAND UNIT PAIRING WITH VND MOTOR
20
03
03
03
H
03
H03
Motor No:
= 1
H03
1
UP Button
DOWN Button
After connecting power to the Nucleus-M motor, double-click the MENU button to access the menu. Select MOTOR NO. , press ENTER ,
and adjust the motor number by clicking the UP or DOWN button. Adjust the motor number to 1 (purple), 2 (green), 3 (blue), or 4 (yellow)
to control the Nucleus-M motor by using the corresponding components of the Nucleus-N II hand wheel controller or multi-functional control handle.
THE NUCLEUS-N II HAND UNIT PAIRING WITH THE NUCLEUS-M MOTOR (METHOD 2)
Adjust the motor number by clicking the UP or DOWN button
(it will automatically exit after 10 seconds of inactivity, or you can exit
by triple-clicking the UP/DOWN button).
Assign motor numbers 1 (purple), 2 (green), 3 (blue), and 4 (yellow)
to control the corresponding components via the Nucleus-N II hand
wheel controller or multifunction control handle to operate the motor.
After connecting power to the VND motor, press and hold the
DOWN button to power it on. Adjust the channel to match
the handwheel by double-clicking the UP or DOWN
button.
Double-click the
UPbutton to
subtract a channel.
Double-click the
DOWNbutton to
add a channel
Channel
Triple-click the UP button to enter the motor number setting:
THE NUCLEUS-M MOTOR NUMBER SETTING
After connecting power to the Nucleus-M motor, long-press the
POWER button to power on. Adjust the channel to match the
hand unit by double-clicking the UP or DOWN button.
Enter the hand wheel controller’s menu, select CONNECT - 2.4 G mode, then turn ON and click CHANNELS to switch
to manual channel mode. Select an available channel (e.g., CH3), then exit this interface.
Enter the hand wheel controller’s menu, select CONNECT - 2.4 G mode, then turn ON and click CHANNELS to switch to manual
channel mode. Select an available channel (e.g., CH3), then exit this interface.
SEARCH
MANUAL
C H �
C H �
C H �
C H �
CONNECT
�.�G
CHANNELS
O N
� . � G
W I F I
CONNECT
BLUETOOTH
A
F
FOCUS
ZOOM
IRIS
A
B
RE
C
12
A
F
SEARCH
MANUAL
C H �
C H �
C H �
C H �