Epson Y16499100301 - Manual (Page 42)

The cursor block is on the
Baud rate
option. To change
the speed of communication, press Enter. The screen displays
the following:
110 bps
150 bps
300
bps
600
bps
1200 bps
2400
bps
4800
bps
9600 bps
19200 bps
38400
bps
Use and to move the cursor block to the desired
communication speed and press Enter.
To set the type of parity check, press 1 to select
Parity
and press
Enter.
The screen displays the following:
None
Odd
Even
Use the arrow keys to move the cursor block to the correct
type of parity check and press
Enter.
To change the data length, move the cursor block to
Data length
and press Enter. The number changes to either 7
or 8, whichever was not displayed before. Press Enter again if
you want to reselect the previous number.
To change the number of stop bits, move the cursor block
to Stop bits and press
Enter.
The number changes to either 1
or 2, whichever was not displayed before. To reselect the
previous number, press
Enter
again.
When you finish changing the serial port settings, move the
cursor block to the
* * * SAVE SETTINGS
* * * option and
press Enter.
Setting Up Your System
1-27