Epson Y16499100301 - Manual (Page 87)

5. Turn the screen over and lay it on a flat surface (such as a
table) so you are looking at the back. Locate the small
plastic screw cover on each side of the screen, near the
bottom. As shown below, use a small screwdriver to lift out
each of the covers.
screw
cover
6. Use a Phillips screwdriver to remove both screws and set
them aside.
7. Holding the screen carefully to keep it together, turn it
over so it is face up and lay it flat on the table.
A-4 Options and Maintenance