IOGear Ethernet-2-WiFi Universal Wireless Adapter - Manual (Page 13)

13
15. The adapter will reboot for 90 seconds. During the reboot process, the Wireless
Connection status will change to ACTIVE .
16. Close your browser and change the network settings on your computer back to
DHCP. Refer to steps 4 through 8.
17. Your Ethernet-2-WiFi adapter configuration is complete. Use the included
Ethernet cable to connect the adapter to your Ethernet enabled device such as
a Blu-Ray player, HDTV or game console.
Note : Make sure to set your Ethernet device’s network connection setting to WIRED
for proper operation.
Home Network